Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Fireplace Services in Haverhill: What to Know First
We service Olympia Chimney fireplaces and components across Haverhill, and most jobs are done in a single visit. A typical Olympia Chimney fireplace service call runs $189 to $420 depending on what we find, and you’ll get a firm price before we touch anything. If it doesn’t need doing, we’ll tell you that too.
This page is for homeowners in Haverhill, Bradford, Riverside, and the streets off Broadway and Main who own an Olympia Chimney fireplace, insert, or chimney system and want someone who actually knows the brand. Call (978) 724-7935 and a live person answers. It might be Wendell Pike himself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney’s Ventis double-wall flue pipe showing separation at the joints. We see this regularly in Haverhill homes, especially colonials where the chase runs cold through an unheated attic. The inner liner shifts with contraction, and the lock tabs on Ventis sections back off just enough to leak. We pull the section, inspect the gasket, and reseat or replace it before it becomes a carbon monoxide path.
- The optional Olympia Chimney anchor plate rusting at the roof line. New England ice dams are rough on the galvanized anchor plates. Once the plate corrodes, water tracks down the outside of the flue and into the chase. In Haverhill we deal with this every February. The fix is usually a replacement anchor plate, new flashing, and sealing the storm collar properly.
- Fireplace inserts installed with the wrong Olympia Chimney adapter ring. A lot of the Olympia systems we service were put in when the home was built, but plenty have a secondhand insert sitting on a mix-and-match connector. If the adapter doesn’t match the Ventis collar, smoke rolls back into the room on startup. We verify the collar dimensions against the insert’s outlet and get the right ring on there.
- Damper plates on older Olympia Chimney prefab boxes warping from years of hot fires. Haverhill homeowners like a full firebox, and those old prefab dampers weren’t made for marathon burns. Once the plate warps, you get cold air drafting down into the living room all winter. We can replace the damper assembly on many Olympia models, or install a top-sealing damper if the original is shot.
- The Olympia Chimney class-A pipe cap screen clogging with maple and oak leaf debris. Around Winnekenni Park and up by Kenoza Lake, tree cover is heavy. The factory mesh on Olympia caps catches leaves, then creosote, then draft goes. Symptoms look like a bad liner: smoke spillage, slow startup, cold hearth. Clean the cap, check the flue, and half the time that’s the whole job.
Our Olympia Chimney Fireplace Services Process
- 1
Call us. A live person answers, 24/7. We ask what you’re seeing: smoke rollback, cold draft, water in the firebox, a furnace flue tied into the same chase. We quote a trip fee of zero if you’re inside our county.
- 2
We arrive and lay drop cloths before anything comes off the truck. Wendell and his crew show up in uniform with vacuum gear and a camera. No surprises, no mess on the rug.
- 3
We run a camera through the Olympia Chimney system from the firebox up. This is the part that matters. You see the footage on our screen. We point to exactly what’s wrong and what’s fine. If it’s just dirty, we say so. If a Ventis joint has separated, you’ll see that too.
- 4
Parts decision. For Olympia Chimney work we prefer OEM when it touches safety: anchor plates, collars, adapter rings, flue sections. For cosmetic items like outer shrouds or trim, we’ll offer a quality aftermarket option and tell you the difference in plain English. You decide. The price doesn’t change after the fact.
- 5
The repair or service. Sweep, repair, part replacement, whatever the camera showed. We work clean and we test before we leave: draft check, smoke test, carbon monoxide reading at the firebox opening.
- 6
The 90-Day Done Right Promise. Every job is backed in writing. If something isn’t right, one call brings us back. No arguing, no invoice. Wendell puts his name on this.
What Olympia Chimney Fireplace Services Costs in Haverhill
Here’s what we typically charge for common Olympia Chimney jobs in the Haverhill area:
- Olympia Chimney fireplace sweep and camera inspection: $189 to $289
- Replacing a warped damper assembly on an older Olympia prefab box: $275 to $480
- Anchor plate and storm collar replacement at the roof line: $320 to $550
- Ventis double-wall flue section replacement (per joint or section): $180 to $390
- Full Olympia Chimney fireplace service with insert removal, sweep, inspection, and reseal: $350 to $520
Price moves mostly on what we find once the camera goes up. A clean flue is a brush job. Third-degree glaze, a separated flue joint, or a rusted anchor plate changes the scope. We tell you the number before we reach for a tool, and the $40 off any repair over $200 standing offer applies. Seniors and veterans get 10% off, always. Call (978) 724-7935 for an exact quote. Estimates are free.
Why Haverhill Homeowners Call Top Hat Chimney for Olympia Chimney Work
We’ve been sweeping and repairing chimneys in Haverhill since 1999. Wendell Pike founded this company, and he’s been inside more flues in this city than he can count, from the old colonials up near Bradford Common to the ranch houses off Route 97. When you call, you reach a person who knows the difference between an Olympia Chimney Ventis system and a cheap aftermarket knockoff, and we’ll tell you which one you have just by looking at the cap from the driveway.
We work with other trusted brands too, so if your Olympia Chimney system needs a liner, a resurfacing, or an upgrade, we can talk through DuraFlex, HeatShield, and Gelco as the right fix. Not everything needs a full rebuild. Your flue doesn’t care how the fire looks. It cares how it breathes. And we’ll give you a straight answer before we ask for a dime.
FAQs
We’re an independent Olympia Chimney service provider, not a factory-authorized agent. That means Olympia Chimney’s own warranty is between you and the manufacturer. What we do is work in a way that doesn’t void it: using OEM spec parts where safety is involved, following the installation clearances, and documenting everything with photos so you have a file you can show the manufacturer if a warranty claim comes up.
Most common Olympia Chimney parts, adapter rings, anchor plates, collars, damper assemblies, are available within a few days through our supplier network. Ventis pipe sections often ship direct from east coast distributors, which keeps things moving. If we’re repairing a fireplace at the end of fall in Haverhill, we’ll tell you up front what the wait looks like. Call (978) 724-7935 for a current timeline.
It depends entirely on what the camera shows. If the firebox steel is still sound and the flue is clear, a repair makes sense, and we’ll tell you that plainly. If the anchor plate has rusted through the chase framing, or the flue sections have separated in multiple places, replacement starts to look cheaper than a series of fixes. We never recommend a replacement you can’t verify with the footage. The camera footage and a plain-English verdict, every time, no exceptions.
In most weeks we can get to a Haverhill home within a few days. During October and November, the busiest stretch before the first cold snap, it may take a week to ten days. If it’s a smell issue or visible smoke rollback, tell us when you call and we’ll work you in sooner. A live person answers around the clock.
Once a year, burn or no burn. Chimneys break in the off-season too. Gas fireplaces still produce water vapor and corrosion, and Haverhill’s freeze-thaw cycles do their own work on exterior metal. An annual inspection catches a bad anchor plate or a backed-off Ventis joint before it leaks into your living room ceiling. If the camera says it’s clean, we’ll tell you and you can skip a year.
Written by Wendell Pike, Owner, Top Hat Chimney at Top Hat Chimney, serving Haverhill and nearby areas.